*For use in Airconditioning Ducting Systems of commercial, residential, industrial, hospitality, educational and health facilities.
RydAiR’s RPD series of Air Purifiers untilize a technology called Photo Catalytic Oxidization (PCO). PCO technology has since been validated in numerous case studies, proving the technology dramatically reduces concentrations of airborne aerosol contaminants, neutralizing viruses and bacteria, and wiping out infectious germs and viruses including methicillin resistant staphylococcus aureus (MRSA), Escherichia coli, Norwalk virus, SARS (which is a corona virus), Listeria monocytogenes, Streptococcus spp., Pseudonomas aeruginosa, Bacillus spp, Candida albicans and S.chartarum. The RPD units are designed to be inserted into the supply air ducts of any air-conditioning system. The units are fitted with an automatic air flow sensor.
The special UV lamp reacts with photocatalyst impregnated with rare materials in the RPD units and converts moisture/water vapour (H2O) and oxygen O2 in the untreated air and breaks them up into hydro-peroxides (H2O2) and Hydroxyls which are highly reactive. These hydroxyl radicals are small and agile and gets pushed into the environment where they attack bigger organic pollutant molecules like fungi, mould, odour causing bacteria, molds, VOCs and viruses, even the ones in hard to reach places, breaking apart their chemical bonds and turning them into harmless sub- stances suchas carbon dioxide and water. It is proven to reduce up to 99% of surface microorganisms and dramatically reduce airborne contaminants.
Models | RPD 3500 | RPD 5000 | RPD 10000 |
Power | 230VAC 0.12A 15W | 230VAC 0.15A 20W | 230VAC 0.30A 38W |
Weight (kg) | 2.4kg | 2.6kg | 3.7kg |
PCO Cell Length | 231 mm | 345 mm | 345 mm x 2 |
High Pollution | 2500 CMH | 3500 CMH | 7000 CMH |
Low Pollution | 4000 CMH | 6000 CMH | 12,000 CMH |
The Bipolar Ionization (Needle-Point) process releases large amounts of negative and positive ions. These ions are forced out through the building HVAC system and travel into spaces throughout the building. These ions attach to and deactivate harmful substances like bacteria, mould, allergens, viruses and volatile organic compounds, odours, VOCs including formaldehyde. The ions produces a chemical reaction on the cell membrane surface that inactivate the pathogen. It can reduce up to 95% of microbes in minutes. It is an Active Process that provides continuous disinfection. Bi-Polar ionisation has already been proven as effective against various influenza strains as well as norovirus, SARs and other corona virus like H1N1.
The ions also attach to expelled droplets and dust particles that can transport viruses, enlarging them in a process called agglomeration, making them drop out of breathing area and also which them easier to be caught in the filters.
Installation Type | Duct Mounted |
Electrical Connection: UBP2500A/5000A/7500A/10000A UBM20/UBM20 (Induct Mounting) |
3Pin Plug (UK) 2Wire AC |
Lonization Type | Needlepoint Brushes |
Max Operating Temperature | 50.c |
Life | 3-5Years* |
Pressure Drop | < 10Pa |
Automatic/Manual Airflow Switch | YES Except UBM20/UBM20 (Induct Mounting) |
UL Ozone Test | UL867 |
UL Zero Ozone Validation | UL2998 |
*subject to daily hours of operation and maintenance of brushes |
Models | UBM-20* | UBM20 (Induct Mounting) | UBP-2500A | UBP-5000A | UBP-7500A | UBP-10000A |
Airflow(Max) | 2500CFM/4250CMH | 2500CFM/4250CMH | 2500CFM/4250CMH | 5000CFM/8500CMH | 7500CFM/12,750CMH | 10000CFM/17,000CMH |
Power Consumption | 230VAC 1 Watt, 50/60Hz | 230VAC 1 Watt, 50/60Hz | 230VAC 3 Watts, 50/60Hz | 230VAC 5 Watts, 50/60Hz | 230VAC 8 Watts, 50/60Hz | 230VAC 10 Watts, 50/60Hz |
Dimension | 60x30x30mm | 105x75x50mm | 205x120x75mm | 205x120x75mm | 285x180x70mm | 285x180x70mm |
Housing Type | Epoxy Potted | ABS Plastic | Powder Coated Steel | Powder Coated Steel | Powder Coated Steel | Powder Coated Steel |
Weight | 100gm | 250gm | 1.4kg | 1.5kg | 2.4kg | 2.3kg |
The RydAiR RHP Series of Air Purifiers is a combination of the PCO technology of the RPD series and the Bi-Polar Technology of the UBP Series. This hybrid system provides superior air and surface purification at a very economical cost. The RHP Units can be installed in air conditioning ductwork speedily All models have a built in Airflow Switch that will turn the unit on when airflow is detected. It saves the need for additional costs of installing an interlocking power system with the fan. An Auto / Manual switch allows the user to bypass the airflow switch if so desired.
Models | RHP 3501 | RHP 5001 |
Type | Ozone Free | Ozone Free |
Power | 230VAC 0.12A 15W | 230VAC 0.15A 20W |
Weight | 2.45kg | 2.5kg |
Inserted Length | 290mm | 390mm |
High Pollution | 4000 CMH | 6000 CMH |
Low Pollution | 6800 CMH | 10,000 CMH |